Skip to main content
To KTH's start page

Metallic Elements Dissipation Avoided by Life cycle design for Steel

MEDALS

The proposed project aims to increase recycling ratio of steel and metals through improved sorting of scrap, better separation of non-wanted tramp elements as well as the valuable alloying elements. Steel can be recycled over and over again while retaining its technical properties. However, contaminations of tramp elements and losses of alloying elements do occur in the solid state and liquid state recovery processes currently employed in the industrial value chain. The project aims to enhance the integrated value chain of scrap based steel production through; investigate and develop scrap preparation methods, research new ways of sorting and separation of material, investigate and develop specific methods to remove copper and tin in the liquid phase and to recover copper form steelmaking residues through pyrometallurgical processes, create new steel products that can handle a higher copper content while maintaining required application properties, and finally lab-scale experiments to develop thermodynamic and kinetic modelling focusing on tramp elements. The target is to achieve 90% EOL recovery rates and a reduction of tramp elements by 60-70%, improved separation and sorting of scrap with a targeted increase in separation specificity of 50% and a target of copper element recovery from steelmaking residues about 60%. Ultimately the developed models will, when relevant, be verified with data from full-scale tests in industrially relevant environments. The project involves researchers from academia and industrial companies in five European countries: Sweden, Germany, Spain, Ireland and Italy.

Funding Agency

Horizon Europe

Beginning and End Dates

1 July 2024 to 30 June 2028

Contacts

Björn Glaser
Björn Glaser associate professor

Other information

Programme(s)

Topic(s)

Call for proposal

HORIZON-CL4-2023-TWIN-TRANSITION-01

See other projects for this call

Funding Scheme

HORIZON-RIA - HORIZON Research and Innovation Actions

MEDALS Website

www.medals.proj.kth.se/

Page responsible:webmaster@mse.kth.se
Belongs to: Materials Science and Engineering
Last changed: Apr 25, 2025
Optimization of the ingot casting process by minimising macrosegregation and porosity
Avoiding cracking during casting of a duplex stainless steel
Highly efficient technologies for increased yields in steelmaking processes and reduced environmental impact
Valorization of wet biomass residues for sustainable steel production with efficient nutrient recycling
Synthesis, structure and application of bio-binders for electrodes and refractories in the metallurgical process industries
Substitution of fossil-based carbon with lignin in furnace electrodes for the metallurgical industry
Metallic Elements Dissipation Avoided by Life cycle design for Steel
Application of Microwave Plasma Generator for the Production of Solar Grade Silicon
Substitution of fossil Combination in Industrial high-Temperature processes by Advanced Electrical and plasma heating technologies
P purification of MeOH sludge to produce synthetic fluorspar and to recover phosphorus
Refractory materials in steel production: mechanisms of lining wear
Validation of Simulation Models for Steel Production
Fossil free Graphite production with Molten iron graphitization of biomass
Upgrading of biobased pyrolysis oil in existing refinery infrastructure
Biomaterials for carbon anode in aluminium production
Innovative Integrated Tools and Technologies to Protect and Treat Drinking Water from Disinfection Byproducts (DBPs)
Catalytic reduction of CO2 gas to solid carbon - towards emission-free steelmaking
Clean metallurgy
FerroSilva - fossil-free virgin steel from iron ore and biogenic reduction gas
Computational fluid dynamics
Energy and furnace technology
Recycling plastic wastes to valuable chemicals of monoaromatics and metals through catalytic-pyrolysis
Optimized biofuel-production via two-step upgrading via catalytic pyrolysis and hydrotreatment
Electrified-Catalytic Reforming using 3D printed catalysts for Biomethane production from biomass pyrolysis
High-temperature experimental kinetics
Powder metallurgy
Advanced design, monitoring , development and validation of novel HIgh PERformance MATerials and components