Till innehåll på sidan
Till KTH:s startsida

Avhandlingar, journalartiklar och konferenspresentationer och publikationer från medarbetare på enheten för processer

Vi är stolta över att presentera vårt arbete på många nationella och internationella konferenser och att publicera artiklar i ansedda tidskrifter. Här kan du se en sammanfattning av våra senaste artiklar och kommande konferenspresentationer.

Journalurval

Vid urval av en journal, vi övervägar journalens rykte, tiden till publicering och möjligheten att publicera Open Access. Man kan hitta mer inforamation kring journalurval på Anders Wändahls (KTH Bibliotektet) GitHub sida  (länk till externt webbplats, på engelska).

Artiklar och avhandlingar 

[1]
Z. Shi et al., "Catalytic graphitization of engineered pyrolysis bio-oil for sustainable graphite and hydrogen Co-production," Renewable energy, vol. 256, 2026.
[2]
G. Wang et al., "Application feasibility of corn cob hydrolyzed residues in blast furnace injection: Physicochemical, combustion behaviors and kinetics," Biomass and Bioenergy, vol. 205, 2026.
[3]
A. Mlonka-Medrala et al., "Waste-Derived carbon porous materials for enhanced performance in adsorption chillers : A Step toward a circular economy," Applied Thermal Engineering, vol. 260, 2025.
[4]
P. Yang et al., "Strategic economic and energy analysis of integrated biodiesel production from waste cooking oil," Energy Conversion and Management, vol. 325, 2025.
[5]
W. Liang et al., "Co-combustion reaction of corn stalk hydrochar and anthracite : Kinetics, mechanism and CO2 emission reduction," Fuel, vol. 388, 2025.
[6]
J. Li et al., "Unveiling the role of lignin in biomass-derived hard carbon anodes via machine learning," Journal of Power Sources, vol. 631, 2025.
[7]
H. Fredriksson och U. Åkerlind, Physics of Functional Materials. Chichester : Wiley, 2025.
[8]
M. Schäfer, U. Faltings och B. Glaser, "Machine learning approach for predicting tramp elements in the basic oxygen furnace based on the compiled steel scrap mix," Scientific Reports, vol. 15, no. 1, s. 2430, 2025.
[9]
N. Zhang et al., "Research on life cycle assessment of low-rank coal by hydrothermal carbonization in blast furnace," Process Safety and Environmental Protection, vol. 194, s. 582-592, 2025.
[10]
J. J. Bolívar Caballero et al., "Electrified catalytic steam reforming for renewable syngas production : Experimental demonstration, process development and techno-economic analysis," Applied Energy, vol. 377, 2025.
[11]
J. J. Bolívar Caballero et al., "Renewable syngas production from electrified catalytic steam reforming of biomass pyrolysis volatiles," Chemical Engineering Journal Advances, vol. 21, 2025.
[12]
M. Schäfer, "An AI-powered holistic system for optimizing the usage of steel scrap in steel production," Doktorsavhandling Stockholm : KTH Royal Institute of Technology, TRITA-ITM-AVL, 2025:7, 2025.
[13]
S. Kuthe et al., "Exploring Wettability of Liquid Iron on Refractory Oxides with the Sessile Drop Technique and Density Functional-Derived Hamaker Constants," ACS Applied Materials and Interfaces, vol. 17, no. 10, s. 16173-16186, 2025.
[14]
S. Liu et al., "High temperature testing of PEEK and PPS coatings on copper wires," npj Materials Degradation, vol. 9, no. 1, 2025.
[15]
F. D'Elia et al., "Influence of melting mode on melt pool dynamics and microstructure in WE43 Mg alloy: A combined computational and experimental approach," Materials & design, vol. 253, 2025.
[16]
Y. Li et al., "Mechanism for ice growth on the surface of a spherical water droplet," Physical Review B, vol. 111, no. 7, 2025.
[17]
Y. Jin et al., "Development of biomass pyrolysis bio-oil as a renewable surface engineering agent for bio-based hard carbon production," Journal of Power Sources, vol. 641, 2025.
[18]
S. Carretero-Palacios et al., "Impact of metal oxidation on ice growth and melting," Physical Review B, vol. 111, no. 8, 2025.
[19]
R. Behling et al., "The impact of tube voltage on the erosion of rotating x‐ray anodes," Medical physics (Lancaster), vol. 52, no. 2, s. 814-825, 2025.
[20]
R. Behling et al., "Rotating anode x-ray tube technology at the limit," i Medical Imaging 2025: Physics of Medical Imaging, 2025.
[21]
R. Behling et al., "Microparticle x-ray targets," i Medical Imaging 2025: Physics of Medical Imaging, 2025.
[22]
B. V. Rangavittal, "Advanced Techniques for Process Optimization in Iron and Steelmaking: Modeling and Monitoring Innovations," Doktorsavhandling Stockholm : KTH Royal Institute of Technology, TRITA-ITM-AVL, 2025:26, 2025.
[23]
S. Kuthe, C. Persson och B. Glaser, "Physics-Informed Data-Driven Prediction of Submerged Entry Nozzle Clogging with the Aid of Ab Initio Repository," Steel Research International, 2025.
[24]
J. Cai et al., "Decision-Making in Complementary Products Supply Chain : Game Theory and Sensitivity Analysis," SYSTEMS, vol. 13, no. 5, 2025.
[25]
M. Vynnycky, B. V. Rangavittal och B. Glaser, "Analysis of a mathematical model for multi-phase motion and local non-equilibrium heat transfer in a blast furnace," Journal of Engineering Mathematics, vol. 150, no. 1, 2025.
[26]
L. Ye et al., "Comparative study on the synergistic effects of hydrochar and coke tar residue on combustion : physicochemical properties, thermochemical behaviors and kinetics," Journal of thermal analysis and calorimetry (Print), 2025.
[27]
H. Yang et al., "Sustainable production of bio-based epoxy resins using the phenolics produced via atmospheric ex-situ catalytic hydropyrolysis of biomass," Journal of Industrial and Engineering Chemistry, vol. 148, s. 492-501, 2025.
[28]
K. Rigas, "Vibration-Based Monitoring of Gas Stirring in Steelmaking Ladles: Effects of Fluid Properties and Operational Parameters," Doktorsavhandling Stockholm : KTH Royal Institute of Technology, TRITA-ITM-AVL, 2025:31, 2025.
[29]
C. Lin et al., "Improving the Efficiency of Low-Cost and Eco-Friendly Cu3SbS4-Based Solar Cells : A Comprehensive Study of Alloying, Device Configuration, and Resistance Control Combining First-Principles Calculations and Device Simulations," The Journal of Physical Chemistry C, 2025.
[30]
J. Svantesson, N. Kojola och M. Ersson, "Numerical Study on the Effect of Material Parameters and Process Conditions on the Melting Time of Hydrogen-Direct Reduced Iron," Metallurgical and materials transactions. B, process metallurgy and materials processing science, 2025.
[31]
D. Borselli et al., "Muon imaging of a blast furnace: The European project BLEMAB," Journal of Applied Physics, vol. 138, no. 8, 2025.
[32]
"Treatise on Process Metallurgy : Volume 2A: Process Phenomena," 2. uppl. , Elsevier BV, 2025.
[33]
S. Seetharaman et al., "Preface to the 2nd Edition," i Treatise on Process Metallurgy : Volume 2a Process Phenomena, 2. uppl. : Elsevier BV, 2025, s. xxvii-xxix.
[34]
T. Tanaka et al., "Surface Tension Models," i Treatise on Process Metallurgy Volume 2a : Process Phenomena, Seshadri Seetharaman; Alexander McLean; Roderick Guthrie; Sridhar Seetharaman; Hong Yong Sohn red., 2. uppl. : Elsevier BV, 2025, s. 29-47.
[35]
B. Pérez Horno, A. Feldmann och P. Samuelsson, "Mapping the dynamics shaping the future of steel recycling," Discover Sustainability, vol. 6, no. 1, 2025.
[36]
S. Jain et al., "Predicting the magnetic behaviour of homogenized CoCrFeNiAlx high entropy alloys at different aluminium content and temperatures : Reducing experimental dependency through machine learning approaches," Materials Chemistry and Physics, vol. 346, 2025.
[37]
G. Wang et al., "Hydrothermal Carbonization of Biomass Waste for Solid Biofuel Production : Hydrochar Characterization and Its Application in Blast Furnace Injection," Recycling, vol. 10, no. 3, 2025.
[38]
K. Rigas et al., "Experimental Investigations on the Impact of Operational Conditions on Bubble Dynamics and the Resulting Vibrations in Gas-Stirred Ladles," Steel Research International, 2025.
[39]
J. Svantesson, "Computational Modelling of Melting, Solidification, and Slag Dynamics in Sustainable Ironmaking," Doktorsavhandling Stockholm : KTH Royal Institute of Technology, TRITA-ITM-AVL, 2025:36, 2025.
[40]
H. Vardhan et al., "Starch–biomacromolecule complexes : A comprehensive review of interactions, functional materials, and applications in food, pharma, and packaging," Carbohydrate Polymer Technologies and Applications, vol. 11, 2025.
[41]
S. Qin et al., "Assessing the Techno-Economic Feasibility of Bamboo Residue-Derived Hard Carbon," Applied Sciences, vol. 15, no. 13, 2025.
[42]
S. Jain et al., "Machine Learning Approaches for Predicting Mechanical Performance and Reducing Experimentation in Refractory High-Entropy Alloys," Advanced Engineering Materials, vol. 27, no. 12, 2025.
[43]
A. Kamalasekaran, P. Mellin och C. Hulme, "Diffusion Model-Guided Improvement of Chemical Homogeneity in Iron–Nickel Alloy Powder Synthesized by Solid-State Hydrogen Reduction," JOM : The Member Journal of TMS, 2025.
[44]
X. Ning et al., "Reduction Study of Carbon-Bearing Briquettes in the System of Multiple Reductants," Materials, vol. 18, no. 18, 2025.
[45]
K. Rigas, M. Svensson och B. Glaser, "Vibrational Analysis of Steelmaking Ladles: Findings from Industrial and Laboratory Studies for Model Development and Stirring Optimization," Steel Research International, 2025.
[46]
J. J. Bolívar Caballero, "Catalyst Development and Distributed Electrified Heating in Reforming Processes for Efficient Renewable Syngas and Fuel Production," Doktorsavhandling Stockholm : Kungliga tekniska högskolan, TRITA-ITM-AVL, 2025:2, 2025.
[47]
S. Gulshan et al., "Enhanced Aromatic Yield from WEEE via Ex Situ Catalytic Pyrolysis : A Comparative Study of HZSM-5, Fe/HZSM-5, and CaO Catalysts in Single and Dual Modes," ACS Sustainable Chemistry and Engineering, vol. 13, no. 15, s. 5493-5505, 2025.
[48]
J. Svantesson, M. Ersson och N. Kojola, "Capillary Infiltration of Slag in Hydrogen-Direct Reduced Iron and Influence on Melting," ISIJ International, vol. 65, no. 11, s. 1607-1619, 2025.
[49]
J. Zhong et al., "Theoretical design of homojunction solar cells based on chalcopyrite AgInSe2: a combined study of first-principles calculations and device simulations," Journal of Materials Chemistry C, vol. 13, no. 32, s. 16722-16732, 2025.
[50]
J. B. Fogelström, "Reduction of industrial hematite pellets using hydrogen and some of its impacts on steelmaking," Doktorsavhandling Stockholm, Sweden : KTH Royal Institute of Technology, TRITA-ITM-AVL, 2025:43, 2025.

Kommande konferenspresentationer

Kommer snart.